Cathodic protection of steel piles pile test test test test piles, piles of cement pvc FRP test pile 



 ________________________________________ 
 Test pile 
 Product Description 
 Cathodic protection system test piles is an essential device, mainly for the cathodic protection test results and operating parameters. Test piles in accordance with the material can be divided into steel test piles, test piles of glass steel, concrete test piles, test piles and other types of plastic, steel test piles which can be divided into carbon steel and stainless steel. Test piles in accordance with the potential of functional test can be divided into piles, current test piles, test piles and other insulation. 

 Design purposes 
 Test piles were used primarily to protect the potential of the test can be used for tanks, pipelines, port facilities and other metal structures, the protective effect of cathodic protection system testing; also can be used for sacrificial anode current test, insulation joints in the test. 

 Standards 
 SYJ 4006-1990 Cathodic Protection Pipeline construction and acceptance. 
 SYT0036-2000 buried steel pipeline to force current cathodic protection design. 
 SYT 0019-97 sacrificial anode for buried steel pipeline cathodic protection design. 

 Usage: 
 The most important application of test piles, cathodic protection is the protection potential of the test, commonly used to test the storage tanks, pipelines and other underground metallic structures or underwater cathodic protection potential. When used as needed to be protected in the body one or more zero welding cable, introduced into the test piles terminals within the same time, one or more reference electrode cable test piles also introduced the terminal, between terminals independent and do not turn to each other; test piles can be used as wiring purposes, as the wiring purposes, with special connection piece connected to the corresponding terminals. 

 Note: 
 The installation location of test piles should be less prone to water erosion choose, landslide and debris flow areas. Installation should ensure solid foundation to avoid settlement of pile caused by tilt. 



 Galvanized pipe from the inside and outside the test piles, test line, testing joint composition. Joint detection is divided into six, eight, ten joints of three, according to the user's requirements. 
 Model ZHC-3, ZHC-2. 

 Test piles are full-height 2 meters 3 meters, or both, diameter of 0.1 meters. 

 The new and improved test piles Xiali motor vehicles by painting the outside of spray paint. Thus have a better corrosion resistance to ultraviolet aging resistance. 
 Test test piles mouth, the door shaft made of stainless steel. Test pile test port with rain canopy to prevent rain intrusion. Test test piles open the door with a special key to prevent irregular open. 

 I produced the test piles marketing throughout the country, such as the Shaanxi-Beijing natural gas across the board with about 800 sticks. Dongying to Linyi (gas transport) across the board more than 220 branches 
 More a small amount of use is not in this to list. 

 Size: 2000 × Φ 108 × 4mm; 1800 × Φ 89 × 3mm; 1200 × 120 × 120mm; 1600 × 500 × 300 

 Classification of test piles: 

 1, according to the material points: steel test piles, concrete test piles, test piles of plastic. Steel test piles, test piles are divided into carbon steel and stainless steel test piles. 

 2, according to function: 
 ● potential test piles: protection potential applied to the detection 
 ● sacrificial anode test piles: used to connect sacrificial anode, sacrificial anode performance parameters measured 
 ● current test pile: the current in the measuring tube 
 ● protective effect of test piles: Connect the test piece 

 Steel test piles 



 Concrete test piles 



 Explosion-proof test piles 


 Collection and transmission module 

 Parameters of test piles for the detection of cathodic protection, pipeline management and maintenance is an essential device for cathodic protection potential, current, insulation testing, leak detection can also be used to cover and the AC and DC interference did not try. Its function is mainly divided into: 
 Potential test piles: the main protection for the detection of potential; 
 Current test piles: Measuring tube current; 
 Sacrificial anode test piles: used to connect sacrificial anode, sacrificial anode performance parameters measured; 
 Protective effect of test piles: Connect the test films. 
 Standard: SY/T0036-2000 
 Test: QDCF/J6-2007 
 Specification: 
 Model Specification 
 Diameter × wall thickness (length × width) × high mm Material Notes 
 CFCS-1 Φ108 × 4 × 3000 steel can be adjusted according to user requirements specifications and structure 
 CFCS-2 Φ89 × 4 × 1800 steel, broken glass can be adjusted according to user requirements specifications and structure 
 CFCS-3 120 × 120 × 1200 stainless steel can be adjusted according to user requirements specifications and structure 
 CFCS-4 120 × 120 × 1600 cement demand can be adjusted according to user specifications 
 CF-G collection and transmission module assembly in steel, concrete test piles abdominal cavity.